yamaha 75 hp outboard for sale
yamaha 75 hp outboard for sale….. With its increased 1.8 litre capacity and single overhead camshaft, four-valve per cylinder design, the new F75 delivers improved acceleration and power-to-weight performance.
ECM Micro-Computer Control
This outboard is controlled by an advanced microprocessor Engine Control Module (ECM), which receives inputs from six major sensors located throughout the engine. This information is used to ensure the engine runs at peak performance, by delivering the right fuel/air mixture to each combustion chamber.
High Output Alternator
A 12-Volt 35-Amp high-output alternator ensures that power is always available to start the engine, even after long periods of idling or running at low revs. This not only provides extra starting power, but delivers sufficient power to run the wide array of on-board electronic devices used in modern boating.
Larger 81mm Cylinder Bore
The previous-generation F75 used a 79mm cylinder bore, in the next-generation F90 the cylinder bore size has been increased from 79mm to 81mm which provides more efficient power delivery. A larger valve has been used for increased transfer efficiency for both intake and exhaust.
The crankshaft design is offset by 5mm from the centre of the cylinder. This innovative design decreases internal friction and promotes a more efficient transfer of power to the crankshaft.
Type: Outboard Motor
Model: F75 HP
Model Number: F75TLR
Series: Four Stroke Midrange
Engine Type: 4 Cylinder
Displacement: 97 ci (1596 cc)
Borex Stroke: 79 x 81.4 mm (3.11 x 3.20in)
Prop Shaft Horsepower: 75 @ 5500 RPM
Compression Ratio: 9.6
RPM Range: 5000-6000
Fuel Induction System: EFI (DOHC)
Fuel Type: Unleaded gasoline (minimum pump octane 87)New Price For Brand New/Used 2018 Yamaha 75HP Outboards Motors
Exhaust: Thru prop
Ignition System: TCI Micro Computer
CARB Rating: 3-Star
Alternator Outputat WOT: 25A
Starting System: Electric
Lubrication: Wet Sump
Oil Capacity: 4.5 quarts
Recommended Engine Oil: Yamalube 4M
Gear Ratio: 2.31
Control Type: Remote
Trolling Throttle Adjustment: /- 50 RPM increments (600 – 1000 RPM range) via Command Link System
Cooling: Water, Thermostatic Control
Weight: 369 lb (168 kg)
Gear Shift: F-N-R
Command Link System: Optional Equipment
Enhanced Ultimate Corrosion Protection System UCP: Standard Feature
Power Trim and Tilt: Yes
Shaft Length: 20 inch
Gearcase Rotation: Right Hand (Standard)
Propeller: Optional Equipment
Tiller Handle Kit: Optional
Freshwater Flush: Yes
There are no reviews yet.